View previous topic :: View next topic |
Author |
Message |
DcYpHeR rice boy
Joined: 12 May 2003 Posts: 12
|
Posted: Tue Jun 03, 2003 7:52 pm Post subject: Can someone please help me? |
|
|
Hi all,
I just gotta question about sum shit im putting in my gemini. first off i wanna fit a cam i got using that tutorial on this site and then im wanna sit some webbers from an XF falcon i am getting of a mate. I just wanna know how these will run together. i dont really know much about this shizzle but will fitting both a cam and webbers make much difference? Also i was wondering if its hard to fit webbers? i have the downdraught adapter to go from the XF to gemini but i dont know how to fit all the cables etc. Has anyone done this that can help me?
Thanx |
|
Back to top |
|
|
hypaTG backyard mechanic
Joined: 15 Oct 2002 Posts: 524
|
Posted: Tue Jun 03, 2003 8:01 pm Post subject: Re: Can someone please help me? |
|
|
do you know what webers they are off the xf? probably 34adm's. you can fit 1 onto the standard manifold using an adaptor plate, redline accelerator cable bracket and a linkage kit. if you wanted to fit 2 34adm's you'd need a manifold made up as there are no twin carby manifolds available to suit those carbies. fit the weber and the cam and you should have a bit of fun. hope that helps, good luck. |
|
Back to top |
|
|
DcYpHeR rice boy
Joined: 12 May 2003 Posts: 12
|
Posted: Tue Jun 03, 2003 8:08 pm Post subject: Re: Can someone please help me? |
|
|
thanx alot for ur reply man, although that all just went over my head. this part here "using an adaptor plate, redline accelerator cable bracket and a linkage kit" does that mean i needa buy sum utha stuff? and when u say have a bit of fun what does that mean? will it increase performance? |
|
Back to top |
|
|
Gold TX Sleeper backyard mechanic
Joined: 05 Feb 2002 Posts: 509
|
Posted: Wed Jun 04, 2003 12:16 am Post subject: Re: Can someone please help me? |
|
|
Go to AutoBarn (Yonnee, are your ears burning yet D ), they will have an adaptor plate, an accelorator cable bracket and any other linkages needed to fit the Weber. All made by 'Redline'. The rep you speak to should be able to help you out, and know what you need to get you on your way.
If this was over your head, i'd suggest going there, buying the parts, then getting a professional to fit the them.
Live fast, die sideways... |
|
Back to top |
|
|
|