Performance Parts

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

I gotta get rid of some stuff from garage cause need cash... if u dont like the prices then give one of your own and I'll consider it.

Crow Cams Stage 4 cam comes with 2L lifters $70

Rekitted 34ADM Weber with brand new chrome air filter assembly $80

Camira 14' rims with 2 tyres good tread. Scratchless professionally polished but never put back on car. $100 set of 4

Custom · tinkerer Joined: 27 Mar 2003 Posts: 63

Where are u?

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

I didnt get to finish the list... B4 u ask I am 15mins west of Ipswich but going to brissie possibly Friday.

Suzuki Swift GTi Seat VGC already mig welded onto Gemini rails and approved by engineer. Adjustable back, very comfortable and sinch to put in. Gives u greater feel and therefore control of car. $160

Professionally made spacers for use with FWD offset rims. $50/set 4

2 x 99% Yokohama A509's AWESOME grip for wider rims very low profile so drops ratio and increases acceleration, much cheaper way that changing dif ratios. 205 65 13 $90 pair

TX/C/D Bonnet VGC partly in primer/ sanded back $40

Stock Springs $15 set

SL/X Seats front and rear (TAN) GC $40

Glass tinted all shapes $various

4-2 cast extractors for twin system or can go into 1. These extractors are an official Gemini option so can be used in Gemini Rally series in place of standard manifold. Can also be used if u wish to run a twin exhaust system. $30

All parts from TX/C/D/E available ... throwout prices to clear it all.

Give me a reply here or msg/call if possible
(07)54644373
0422451225

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

sorry champ.. still writing that continued ad... will travel if price is right to deliver.

Custom · tinkerer Joined: 27 Mar 2003 Posts: 63

Willing to travel to Melb? hehehe... just kidding lol,
I am after the Crow Cams Stage 4 cam comes with 2L lifters $70
Will u C.O.D.?
If so, I will find out some prices and get the cam & lifters off you.

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

I will consider it if u pay for postage. I much rather sold in Qld due to ease but yeah get back to me with prices and if not sold in next few days its yours Wink

Custom · tinkerer Joined: 27 Mar 2003 Posts: 63

Cool bananas, I will get back to you within the next few days.

logem · tinkerer Joined: 23 Jan 2003 Posts: 442

do you have a picture of the seats?

Gene FJ20DET · Posted: Thu Jun 05, 2003 11:20 am Post subject: THA CAM

whats it equivelent (sp) to
30/70? bigger??
pritty keen
let me know
_________________

Gene FJ20DET

im keen for the cam! im in brissy.
what size is it?

also very interested in the seats.
cheers gene
_________________

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

Hi guys,

The information on the cam is below. It is a very lumpy cam with noticeable difference from 30/70, Crow Cams strongly recommend that it be used with hardened valve springs but that is easy (see R&D article on hardened springs). I personally believe 32/36 doesnt let this cam work to full potential but will suffice as minimum carby to run it at high revs/load. Porting is strongly recommended too.

PART NO. VALVE TIMING DUR .075" DUR. VALVE LIFT POWER RANGE
782509 IN.38/70 288 225 .466" 3000
EX.74/34 288 226 .466" 7000

If u want to compare to other cams then go to:

http://www.crowcams.com.au/templates/Catalogue-Gemini-OHC.shtml

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

I have had a lot of interest in the seat so far. It is almost identical to the one in the workshop pic but it is

ONLY DRIVER SIDE

I thought I had wrote that but must have missed it. Due to interest I am putting it p for auction to highest bidder. I will let u know tomorrow what that is so far. Have a look at pics at

http://www.hotgemini.com/cgi-bin/workshop2.cgi?action=sp&tip_id=92&pic_id=3

the backs are different though so must have been from earlier model.

roz85 · tinkerer Joined: 03 Apr 2002 Posts: 230

im interested in the spacers. Give me some info about them!

Twisted_torque · tinkerer Joined: 26 Feb 2002 Posts: 240

There are two different sets of 2 for front and back

Set A
Diameter of outside 150mm inside 72mm
Thickness 8mm
4 holes but can be used for both corolla and gem sizes doe to slightly rectangualr shape.

Set B
Diamete of outside 160mm inside 72mm
Thickness 6mm
8 holes but still only suitable for 4 or 8 studs similar slightly rectangular shape.

I pretty sure they are billet alluminium.
I am going away over the long wknd but prolly be back mon arvo if u wanna pick em up or if u live on nth side of brissie I could drop em off on way. Where u live??