HotGemini.com - Holden Gemini heaven
Home What's New About Help Contact




non-torque tube piazza diff

 
Post new topic   Reply to topic    hotgemini.com Forum Index -> General Gemini Chat
View previous topic :: View next topic  
Author Message
GEMINOS
rice boy


Joined: 04 Oct 2003
Posts: 17

PostPosted: Mon Oct 06, 2003 9:58 pm    Post subject: non-torque tube piazza diff Reply with quote

hey does anyone kno if these diffs will bolt in a gem van ok..remember IT has NO TORQUE TUBE...
Back to top
View user's profile Send private message
GasGem
backyard mechanic


Joined: 05 Nov 2001
Posts: 755

PostPosted: Tue Oct 07, 2003 11:13 am    Post subject: Re: non-torque tube piazza diff Reply with quote

NO IT WON'T bolt straight in
Back to top
View user's profile Send private message Send e-mail
GasGem
backyard mechanic


Joined: 05 Nov 2001
Posts: 755

PostPosted: Tue Oct 07, 2003 11:25 am    Post subject: Re: non-torque tube piazza diff Reply with quote

ok for and example I have a 9 inch under my gem,

it envolves a piazza diff, a gemini diff and a 9 inch diff, a special cross member and 2 special arms to replace the torque tube and a long tail shaft.

piazza diff for the brakes and tube ends gemini diff for the spring buckets and 9 inch for the center housing

cheers
Back to top
View user's profile Send private message Send e-mail
Gene FJ20DET
hod rodder


Joined: 06 Oct 2001
Posts: 9163
Location: brisbane

PostPosted: Tue Oct 07, 2003 3:48 pm    Post subject: Re: non-torque tube piazza diff Reply with quote

im doing the same as that with gemini tubes/springs, VL disk, hylux center and housing
_________________
Back to top
View user's profile Send private message Visit poster's website
GEMINOS
rice boy


Joined: 04 Oct 2003
Posts: 17

PostPosted: Tue Oct 07, 2003 11:16 pm    Post subject: Re: non-torque tube piazza diff Reply with quote

whats wrong with this diff housing? can i use it if i shorten it .. it has the upper arms on it instead of torqu tube still . could i get it fitted in a similar way to yours with the long tailshaft..
but without changing housing to a 9 inch or hylux ..so will my lsd center fit in a diesal or is mine different to other piazza centers
Back to top
View user's profile Send private message
Poida
tinkerer


Joined: 29 Aug 2003
Posts: 303
Location: Vic/NSW border

PostPosted: Wed Oct 08, 2003 3:47 am    Post subject: Re: non-torque tube piazza diff Reply with quote

If what you are saying is that you gave a Piazza LSD diff, the centre mechanicals are the same (except yours is an LSD centre while Geminis used single wheel diffs) as those used in Gemini diesel diffs.

So what you need to do is to strip the gears and diferential cluster out of the gemini diesel housing and replace it with the equivelant components from the Piazza. Torque tubes on the diesel diffs and centre mount are different to those on the petrol diffs too.

As I mentioned it another post, I'd be inclined to give the job to a trusted, experienced diff rebuilder to assemble it into the new housing. Incorrect assembling will result in a failed diff in very short time.

By the time you hear it howl the damage is already done.
_________________
I try to tackle one day at a time, but often several days attack me at once.



(The views I present are my own and NOT necessarily of the administrators or other members of this site.)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    hotgemini.com Forum Index -> General Gemini Chat All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
© HotGemini.com 2000-2007 | Privacy Policy | Terms of Use | Site Map