View previous topic :: View next topic |
Author |
Message |
BLO20L rice boy
Joined: 19 May 2003 Posts: 16
|
Posted: Wed Dec 17, 2003 12:12 am Post subject: no spark in my supercharged 2L |
|
|
i have just finish fitting my new engine in and i am lacking spark to start the sucker.
engine accessories
opcon autorotor twin screw supercharger 134%overdriven (68teeth-29teeth) running 12-18 PSI, intercooler, triple blow of valve, 2 inch gilmer pulleys, hpc coated ACL pistons 8:1 ratio, o ringed 2L block bored 60thou over size, balenced bottem end, ported an polished 1600cc head, oversized inlet valves resostioned an oversized exhaust valves, heavy duty valve springs, custom grind waggot camshaft with adjustable valve timing, custom fabricated intake manifold, 4X13b 660cc injectors, bosh 500HP fuel pump and pre pump with a custom surge tank, VN throttle bodies and coil packs, k&n filter, hpc coated extractors into 2 and half inch system, wolf 3D computer
i am running a wolf 3D computer and i have isolated the problem to be in either my ignition moduals or coil divider. when i test my ignition moduals for voltage, with coil divider disconected it reads around 10 volts for both but when the divider is hook up there is only 2 volts in one modual and 3 in other. Is there any way to test my coil divider because the moduals should be getting 8 volts at the turn of the KEY......??? |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Wed Dec 17, 2003 12:42 am Post subject: Re: no spark in my supercharged 2L |
|
|
fuck thats some technical shit. So is the voltage getting divided by 4 when you turn the key? |
|
Back to top |
|
|
BLO20L rice boy
Joined: 19 May 2003 Posts: 16
|
Posted: Wed Dec 17, 2003 5:26 pm Post subject: Re: no spark in my supercharged 2L |
|
|
yeah its pretty technical but it will be worth all the shit when it gets running. na the voltage shouldn't get divided by four it should just drop when divied by the 2 ignition moduals. |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Wed Dec 17, 2003 6:31 pm Post subject: Re: no spark in my supercharged 2L |
|
|
4X13b 660cc injectors
they only ever came 550.
bosch injectors out of old v8 mercs are 660. (opps did i say that out loud) _________________
|
|
Back to top |
|
|
sime tinkerer
Joined: 27 Oct 2001 Posts: 352
|
Posted: Sat Dec 20, 2003 1:26 am Post subject: Re: no spark in my supercharged 2L |
|
|
maybe he is using a malpassi rising rate fuel reg and running a higher base fuel level to give the higher output? also wernt the 12A injectors able to flow more fuel than the 13B ones? |
|
Back to top |
|
|
|