| View previous topic :: View next topic |
| Author |
Message |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
 Posted: Fri Sep 21, 2001 4:11 pm Post subject: dreamin? --(greg j) |
 |
|
i'm doing the old 1600 head on a g200 bottom trick....
am i dreamin' expecting to pull 16's on the 1/4?
i'd be running...
*extractors
*2 1/4 spts exhaust
*1600 head.....
25/65 re-grind cam,
stiff valve springs and oversize valves
everything not previously mentioned is standard.
so what do you's reckon? is anyone running a similar setup and wanna share their quarter times?
thanks for any help
greg |
|
| Back to top |
|
 |
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Fri Sep 21, 2001 5:49 pm Post subject: Re: dreamin? --(James) |
|
|
| yep ur dreamin |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Fri Sep 21, 2001 8:01 pm Post subject: Re: dreamin? --(Benjamin) |
|
|
Depends on whether he is a good driver :)
You would be needing some serious intake gear, either dual sidedrafts or mad EFI, to go with some really good port work and high compression, at least 10:1 but even then?? |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Fri Sep 21, 2001 10:16 pm Post subject: Re: dreamin? --(Dave) |
|
|
| The CDT Gemini could do a 16-second quarter with twin Webers and some head work, and that was a 1600cc - no reason why a G200 with a 1600 head and the stuff you mentioned couldn't do it. You'll be running Avgas or something with compression like that, but. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 22, 2001 3:06 am Post subject: Re: dreamin? --(Ben Wight) |
|
|
It should do a 15 easy. My worked 1600 used to do mid 16's. It was standard bore, and pretty mild.
You should consider a better carby. Maybe a 32/36 weber. instant power in your application, as the Niki is a choker.
Quarter mile times depend alot on tyres and suspension setups. If you have old tyres, and you have lowered the rear of your car a decent amount by cutting the springs, then it will just spin the wheels off the line and you wont get a good launch. New retreads work good with soft suspension. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 22, 2001 7:53 am Post subject: Re: dreamin? --(darren) |
|
|
| No your not dreamin at all. My mate ran 16.0 with weber 32/36, what you guys would call a stage 2 cam , stock G200 bottom end and a shaved and cleaned up Tx head. Had 11.0 compression. Even a stock Tx head on a G200 with no cam and a weber would still do mid to high 16's. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 22, 2001 7:56 am Post subject: Re: dreamin? --(darren) |
|
|
| On that motor didn't redo the cam timing so that was a fair whack out to due to different shaved head. |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sat Sep 22, 2001 11:50 am Post subject: Re: dreamin? --(James) |
|
|
Im sorry for sayin u were dreamin
I ran a 16.67 2night
its a Worked G180 with a 32 DFM weber (smaller then 32/36 I think)
So yea Im pretty happy with that |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sun Sep 23, 2001 3:03 pm Post subject: Re: dreamin? --(greg j) |
|
|
cool! not a bad effort james...thanks everyone for your help. i'll let yas know when i rebuild it and send down a quarter. sounds fairly promising...i'll chase up a holley for her first though.
thankx again
greg |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Sun Sep 23, 2001 9:24 pm Post subject: Re: dreamin? --(gene) |
|
|
| 15s my ass |
|
| Back to top |
|
|
old forum
hod rodder
Joined: 04 Oct 2001
Posts: 15499
|
| Posted: Tue Sep 25, 2001 4:19 am Post subject: Re: dreamin? --(Ben Wight) |
|
|
| your ass then! |
|
| Back to top |
|
|
|
