| View previous topic :: View next topic |
| Author |
Message |
sage
newbie
Joined: 22 Aug 2002
Posts: 9
|
 Posted: Fri Oct 11, 2002 3:21 am Post subject: suck through turbo sys |
 |
|
if anyone could give me a rundown on the basics of a suck through turbo setup i'd be really apriciative.
i'd like to know what carbie i should use and what modifications need to be done to it, what needs to be done to the turbo, and any other recommendations.
i was planning on using a 2inch SU side draft carbie, would that work? |
|
| Back to top |
|
 |
MatMan
tinkerer
Joined: 04 Oct 2001
Posts: 280
|
| Posted: Fri Oct 11, 2002 10:21 pm Post subject: Re: suck through turbo sys |
|
|
| The turbo has to be one with carbon seals, but I don't know exactly what mods the carby needs. |
|
| Back to top |
|
|
lodeo
rice boy
Joined: 01 Oct 2002
Posts: 30
|
| Posted: Thu Oct 24, 2002 12:10 pm Post subject: Re: suck through turbo sys |
|
|
| just sold my suck thru system. It helps if you get the fins in the turbo hpc coated. My turbo fins disintegrated over a period of time cos fuel was running though them. I used a standard 1 3/4 stromberg carb (side draft) got a bigger needle put in it and it is fine. |
|
| Back to top |
|
|
|
