View previous topic :: View next topic |
Author |
Message |
sage newbie
Joined: 22 Aug 2002 Posts: 9
|
Posted: Fri Oct 11, 2002 3:21 am Post subject: suck through turbo sys |
|
|
if anyone could give me a rundown on the basics of a suck through turbo setup i'd be really apriciative.
i'd like to know what carbie i should use and what modifications need to be done to it, what needs to be done to the turbo, and any other recommendations.
i was planning on using a 2inch SU side draft carbie, would that work? |
|
Back to top |
|
|
MatMan tinkerer
Joined: 04 Oct 2001 Posts: 280
|
Posted: Fri Oct 11, 2002 10:21 pm Post subject: Re: suck through turbo sys |
|
|
The turbo has to be one with carbon seals, but I don't know exactly what mods the carby needs. |
|
Back to top |
|
|
lodeo rice boy
Joined: 01 Oct 2002 Posts: 30
|
Posted: Thu Oct 24, 2002 12:10 pm Post subject: Re: suck through turbo sys |
|
|
just sold my suck thru system. It helps if you get the fins in the turbo hpc coated. My turbo fins disintegrated over a period of time cos fuel was running though them. I used a standard 1 3/4 stromberg carb (side draft) got a bigger needle put in it and it is fine. |
|
Back to top |
|
|
|