car wheels that fit gemi's with 4*100mm pattern

GEm1ma has xplod gea · tinkerer Joined: 08 May 2002 Posts: 331

are:Daewoo Cielo, Espero, Nubira, Lanos Daihatsu Charade, Applaus, Sirion Eunos 300, 30X Ford Festive, Laser Holden Barina (94 onwards) Astra, Calibra, Vectra (pre 96) Honda - Accord (pre 89), Civic, Integra, CRX, Prelude (pre 91) Kia Mentor, Credos Mazda 323 (89 on), MX5, Astina, 121 (91 on), Demio, Familia (91 on) Mitsubishi Lancer and Mirage (91 on) Nissan EXA (88 on), Pulsar (89 on), NX, NXR, Micra, Sentra (89 on) Seat Cordoba, Ibiza Suzuki Baleno Toyota MR2 (pre 89) Corolla (85 on), Starlet, Paseo, Corona (90 on) VW Golf 3, Polo.

hope this helps any one whos lookin 4 a set of wheels to suit a gemi.

chris...

ByteMe22 · backyard mechanic Joined: 28 Dec 2001 Posts: 591

out of them which have the correct or simular offset???

TG 1985 · backyard mechanic Joined: 08 Jan 2002 Posts: 550

i got a set of corolla rims, like 98 or 2000, round there, they go on perfect, but when u tighten them, and giv em a spin, they are extremely wonky, where as the rims are perfect. paid $120 for the whole set of 5.

chris.

Stock TE · backyard mechanic Joined: 12 Mar 2002 Posts: 853

The centre hole is probably too small you will have to machine it out.

GEm1ma has xplod gea · tinkerer Joined: 08 May 2002 Posts: 331

i got this info from another source on the internet so yeh, it's only the stud pattern i said.

chris...

Gene FJ20DET

less than half i would guess
_________________

TG 1985 · backyard mechanic Joined: 08 Jan 2002 Posts: 550

yea, the 4 hole 100mm stud pattern is fine, thats y i bought them, but be aware, they may fit, but they may not work.

Stock TE · backyard mechanic Joined: 12 Mar 2002 Posts: 853

What are they like on the back of the car?
I am sure it is just the centre hole (the big hole in the centre of the wheel) not being big enough to fit over the Gemini hub.

TXcoupe · petrol head Joined: 05 Oct 2001 Posts: 1675

u must rember alot of cars dont have a offset of ET 25 most cars have a ET 35 offset
if u fit some of the rims u may need spacers which are frowned upon (well in WA they are) unless ur using them to race with.....

Stock TE · backyard mechanic Joined: 12 Mar 2002 Posts: 853

The mags I have are ET38 and seem to be perfect for wide wheels and tyres. My car is lowered and I had 215/50/r15 on the back without rubbing. So try and get this offset if you are planning on getting wide wheels and tyres get this offset.

Steven · rice boy Joined: 13 Aug 2002 Posts: 31

Have changed to 195/60 14 with 6" camira rims. I have noticed an increase in steering wieght whilst throwing through corners. Im guessing negative offset has upset camber

TXcoupe · petrol head Joined: 05 Oct 2001 Posts: 1675

umm thats not bad but a gemin has a offset of ET25 so the dude with the ET38 has spacers on the front

Stock TE · backyard mechanic Joined: 12 Mar 2002 Posts: 853

I do not have spacers and I am pretty sure the wheels are ET38 but I could be wrong.

Stock TE · backyard mechanic Joined: 12 Mar 2002 Posts: 853

I was wrong, they are ET32.

sooty · rice boy Joined: 11 Apr 2002 Posts: 46

Early BMW 3 series fit (centre hole needs minor adjustment) and as they are rear wheel drive the offset is very close.