View previous topic :: View next topic |
Author |
Message |
GEm1ma has xplod gea tinkerer
Joined: 08 May 2002 Posts: 331
|
Posted: Tue Nov 19, 2002 1:37 pm Post subject: car wheels that fit gemi's with 4*100mm pattern |
|
|
are:Daewoo Cielo, Espero, Nubira, Lanos Daihatsu Charade, Applaus, Sirion Eunos 300, 30X Ford Festive, Laser Holden Barina (94 onwards) Astra, Calibra, Vectra (pre 96) Honda - Accord (pre 89), Civic, Integra, CRX, Prelude (pre 91) Kia Mentor, Credos Mazda 323 (89 on), MX5, Astina, 121 (91 on), Demio, Familia (91 on) Mitsubishi Lancer and Mirage (91 on) Nissan EXA (88 on), Pulsar (89 on), NX, NXR, Micra, Sentra (89 on) Seat Cordoba, Ibiza Suzuki Baleno Toyota MR2 (pre 89) Corolla (85 on), Starlet, Paseo, Corona (90 on) VW Golf 3, Polo.
hope this helps any one whos lookin 4 a set of wheels to suit a gemi.
chris... |
|
Back to top |
|
|
ByteMe22 backyard mechanic
Joined: 28 Dec 2001 Posts: 591
|
Posted: Tue Nov 19, 2002 3:30 pm Post subject: Re: car wheels that fit gemi's with 4*100mm pattern |
|
|
out of them which have the correct or simular offset??? |
|
Back to top |
|
|
TG 1985 backyard mechanic
Joined: 08 Jan 2002 Posts: 550
|
Posted: Tue Nov 19, 2002 4:41 pm Post subject: i think not. |
|
|
i got a set of corolla rims, like 98 or 2000, round there, they go on perfect, but when u tighten them, and giv em a spin, they are extremely wonky, where as the rims are perfect. paid $120 for the whole set of 5.
chris. |
|
Back to top |
|
|
Stock TE backyard mechanic
Joined: 12 Mar 2002 Posts: 853
|
Posted: Tue Nov 19, 2002 6:03 pm Post subject: Re: TG 1985 |
|
|
The centre hole is probably too small you will have to machine it out. |
|
Back to top |
|
|
GEm1ma has xplod gea tinkerer
Joined: 08 May 2002 Posts: 331
|
Posted: Tue Nov 19, 2002 9:34 pm Post subject: Re: TG 1985 |
|
|
i got this info from another source on the internet so yeh, it's only the stud pattern i said.
chris... |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Tue Nov 19, 2002 10:01 pm Post subject: Re: car wheels that fit gemi's with 4*100mm pattern |
|
|
less than half i would guess _________________
|
|
Back to top |
|
|
TG 1985 backyard mechanic
Joined: 08 Jan 2002 Posts: 550
|
Posted: Wed Nov 20, 2002 12:21 pm Post subject: Re: TG 1985 |
|
|
yea, the 4 hole 100mm stud pattern is fine, thats y i bought them, but be aware, they may fit, but they may not work. |
|
Back to top |
|
|
Stock TE backyard mechanic
Joined: 12 Mar 2002 Posts: 853
|
Posted: Wed Nov 20, 2002 2:00 pm Post subject: Re: TG 1985 |
|
|
What are they like on the back of the car?
I am sure it is just the centre hole (the big hole in the centre of the wheel) not being big enough to fit over the Gemini hub. |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Wed Nov 20, 2002 9:02 pm Post subject: Re: TG 1985 |
|
|
u must rember alot of cars dont have a offset of ET 25 most cars have a ET 35 offset
if u fit some of the rims u may need spacers which are frowned upon (well in WA they are) unless ur using them to race with..... |
|
Back to top |
|
|
Stock TE backyard mechanic
Joined: 12 Mar 2002 Posts: 853
|
Posted: Wed Nov 20, 2002 10:05 pm Post subject: Re: TG 1985 |
|
|
The mags I have are ET38 and seem to be perfect for wide wheels and tyres. My car is lowered and I had 215/50/r15 on the back without rubbing. So try and get this offset if you are planning on getting wide wheels and tyres get this offset. |
|
Back to top |
|
|
Steven rice boy
Joined: 13 Aug 2002 Posts: 31
|
Posted: Fri Nov 22, 2002 11:40 am Post subject: Re: TG 1985 |
|
|
Have changed to 195/60 14 with 6" camira rims. I have noticed an increase in steering wieght whilst throwing through corners. Im guessing negative offset has upset camber |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Fri Nov 29, 2002 10:46 pm Post subject: Re: TG 1985 |
|
|
umm thats not bad but a gemin has a offset of ET25 so the dude with the ET38 has spacers on the front |
|
Back to top |
|
|
Stock TE backyard mechanic
Joined: 12 Mar 2002 Posts: 853
|
Posted: Sat Nov 30, 2002 2:29 am Post subject: Re: TG 1985 |
|
|
I do not have spacers and I am pretty sure the wheels are ET38 but I could be wrong. |
|
Back to top |
|
|
Stock TE backyard mechanic
Joined: 12 Mar 2002 Posts: 853
|
Posted: Sun Dec 01, 2002 7:43 pm Post subject: Re: TG 1985 |
|
|
I was wrong, they are ET32. |
|
Back to top |
|
|
sooty rice boy
Joined: 11 Apr 2002 Posts: 46
|
Posted: Sun Dec 15, 2002 12:44 am Post subject: Re: car wheels that fit gemi's with 4*100mm pattern |
|
|
Early BMW 3 series fit (centre hole needs minor adjustment) and as they are rear wheel drive the offset is very close. |
|
Back to top |
|
|
|