View previous topic :: View next topic |
Author |
Message |
coupetx tinkerer
Joined: 09 Apr 2003 Posts: 186
|
Posted: Wed May 21, 2003 8:37 pm Post subject: ECU $$$$$$$$$ |
|
|
what would be the best and cheapest ecu for a g180 dohc engine. Please give prices if u have them/ i am up for any ideas as well. |
|
Back to top |
|
|
Soop backyard mechanic
Joined: 30 May 2002 Posts: 748
|
Posted: Wed May 21, 2003 8:51 pm Post subject: Re: ECU $$$$$$$$$ |
|
|
Cheapest new one you could probably buy is the microtech MT4, its fuel only and runs well on the dohc.
Goes for around $700-800 new with loom and base map.
Cheaper option is to look around for a secondhand one. The older microtech digi series will work fine and cost a lot less secondhand. I picked up a microtech digi2 pro (fuel and ign) with loom for $400.
The older fuel only haltechs (f7, f10 etc) are also excellent and can be picked up for anywhere between $200 and $600 for a fuel only, more if you want fully programmable ignition and fuel.
Its also possible to run the GM delco camira/pulsar/astra computer but its messy to wire up and requires tuning which not many people do these days. It's also leaves room for more problems since obviously its not designed specifically for that application, if you can get it to work it's a great ECU but requires some $$$ and knowledge.
Look around on the net, fast fours, performance forums, here, etc and see what you can dig up. |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Wed May 21, 2003 10:39 pm Post subject: GOOD PRICED ECU |
|
|
http://board.performanceforums.com/forums/showthread.php?s=&threadid=67151785
F.s CHEAP Microtech
i have a microtech MTX-8 with loom and dash (not hand controller) for sale ...need to sell $750 or make a reasonable offer prefered to sell together
anyone intrested can contact me on 0413 114 801 no sms plz.... _________________
|
|
Back to top |
|
|
BlueTC petrol head
Joined: 22 Oct 2002 Posts: 1148
|
Posted: Thu May 22, 2003 12:25 pm Post subject: Re: GOOD PRICED ECU |
|
|
I'll give you $800
for the ECU and Three gauges,
wot is it to suit for?
and where did you get it from bitch
regards |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Thu May 22, 2003 1:02 pm Post subject: Re: GOOD PRICED ECU |
|
|
its not mine.
i cut and pasted it of PF. just for everyone eles in here _________________
|
|
Back to top |
|
|
|